Jump to content

Height of stupidity - Jet Airway pilots


Recommended Posts

ట్యాక్సీవే పై నుంచి విమానం టేకాఫ్ యత్నం.. 148 మంది ప్రయాణికుల ప్రాణాలు గాల్లో కలిసేవే!
06-08-2018 21:08:37
 
636691865163652141.jpg
ముంబై: రియాద్ నుంచి ముంబై రావాల్సిన జెట్ ఎయిర్‌వేస్ విమానాన్ని రన్‌వే పైనుంచి కాకుండా ట్యాక్సీ వే పైనుంచి టేకాఫ్ చేసేందుకు ప్రయత్నించిన ఇద్దరు పైలెట్లపై వేటుపడింది. 150 మంది ప్రాణాలను ప్రమాదంలో పడేసిన ఈ ఘటన వివరాలను తాజాగా సౌదీ అధికారులు వెల్లడించారు. ఇండియన్ డైరెక్టరేట్ జనరల్ ఆఫ్ సివిల్ ఏవియేషన్ (డీజీసీఏ) ఇద్దరి పైలెట్ల లైసెన్స్‌లను రద్దు చేసింది.
 
జెట్ ఎయిర్‌వేస్‌కు చెందిన బోయింగ్ 737 విమానం 141 మంది ప్రయాణికులు, ఏడుగురు సిబ్బందితో ముంబై వెళ్లేందుకు టేకాఫ్‌‌కు సిద్ధమైంది. అయితే, రన్‌వేకు బదులుగా దానికి సమాంతరంగా ఉన్న ట్యాక్సీలు వెళ్లే దారిపై టేకాఫ్‌కు పైలెట్ ప్రయత్నించాడు. టెర్మినళ్లకు చేరుకునేందుకు ఈ దారిని ఉపయోగిస్తారని, ట్యాక్సీలు, పార్కింగ్ బేల కోసం దీనిని ఉపయోగిస్తారని అధికారులు తెలిపారు. ఆగస్టు 3 అర్ధరాత్రి దాటాక రియాద్‌లోని కింగ్ ఖాలిద్ ఇంటర్నేషనల్ ఎయిర్‌పోర్టులో ఈ ఘటన జరిగింది. పైలెట్ల తప్పిదాన్ని గుర్తించిన అధికారులు టేకాఫ్‌ను నిలిపివేశారు. ఈ ఘటనపై దర్యాప్తు జరుపుతున్నట్టు రియాద్ అధికారులు తెలిపారు.
Link to comment
Share on other sites

more details in Hindu:

 

Jet Airways flight tried to take off from taxiway, says Saudi aviation regulator

author-deafault.pngAditya Anand
MUMBAI, AUGUST 06, 2018 13:06 IST
UPDATED: AUGUST 06, 2018 13:16 IST
Representational image

Representational image   | Photo Credit: REUTERS

 

The Mumbai-bound flight had attempted to take off using full power from a taxiway parallel to the designated runway at Riyadh airport

Saudi Arabia’s Aviation Investigation Bureau (AIB) on Monday said the Mumbai-bound Jet Airways Boeing 737, involved in an incident of skidding and evacuation of passengers, was trying to take off from a taxiway and not the designated runway of Riyadh airport.

Jet Airways had on August 3 informed aviation regulator, the Directorate General of Civil Aviation (DGCA) that its aircraft departed the runway after pilots noticed a barrier. Hard braking to abort take off was believed to be the reason for the aircraft skidding to an unpaved area of King Khalid International Airport.

The Saudi regulator, which is jointly probing the incident with the Ministry of Civil Aviation's Aircraft Accident Investigation Board (AAIB), said that the pilots had attempted to take off using full power from a taxiway parallel to the runway from where it was meant to get air borne for Mumbai.

In a statement, the AIB said: "Jet Airways Boeing-737 (VT-JFS) flight (9W) 523 headed to Mumbai with 141 passengers and seven crew members overshot taxiway at King Khalid International Airport at Riyadh.

“Initial factual information confirms that the aircraft attempted take off from taxiway parallel to take off-designated runway while visibility was high and no obstacles or foreign object debris on the taxiway. The aircraft accelerated with full take off power and exceeded the taxiway on to an unpaved area ending up close to the exit of taxiway."

Following the report by the Saudi agency, the DGCA has suspended the licences of both the pilots pending investigation.

Link to comment
Share on other sites

10 minutes ago, Uravakonda said:

Naaku telisi taxiway ki runway ki peddaga difference undi undadhu. So vallu porabadi undochu.

no, there is. runway has lights in the center entire length. and lot more lights at the beginning & end. 

Also, taxi way has solid white/yellow line all through. run ways have broken white lines.

Link to comment
Share on other sites

3 hours ago, swarnandhra said:

no, there is. runway has lights in the center entire length. and lot more lights at the beginning & end. 

Also, taxi way has solid white/yellow line all through. run ways have broken white lines.

Hmm, frustration lo untaru. Good thing is ATC was able to stop these guys. Lazy ATC employees ayyunte gone case.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...